toilet lid damper principle of introduction, come collection!
Release time:
2023-01-10 10:58
Source:
toilet lid damper? Let's take a brief look.
1. The spring damper shock absorbers transported to the site shall be stacked neatly, and the spring damper shock absorbers shall not be stepped on.
2. The shock absorber should be covered and maintained to prevent premature aging due to wind and rain.
3. The cutting spring damping shock absorber should be straight, not angled.
4. Shock absorber method: The shock absorber should be wrapped with a 0.3m long large spring shock absorber, with half-tight ends and no gap in the middle. To ensure that there is no gap between the two, the two should be marked The end of the connector. Tape tightly to prevent leakage.
5. The position of the shock absorber should be accurate, especially near the joints. Spring damping shock absorber positioning bar spacing of 0.5 meters, not short.
6. When the welded structural steel bar is close to the spring damper, effective measures should be taken to ensure that the damper is not damaged. If you are scalded accidentally, please wrap the scalded part tightly with tape.
7. Considering that the number of spring damping shock absorbers on the roof is gradually decreasing, all places that conflict with spring damping shock absorbers should avoid using damping shock absorbers.
8. When pouring concrete, the material should not lean on the spring damping shock absorber, and the vibrator will not collide with the spring damper. It is forbidden to use springs for damping vibrators to clamp one or two vibrators. Especially when vibrating the network, it is forbidden to vibrate in the same direction for a long time, and the vibration time is less than 20 seconds.
9. When taking out the mold, pay attention to prevent the spring shock absorber from leaking. These points need our attention. These problems can be prevented by paying attention to these details and paying attention to them. If the above problems cause damage to the damping shock absorber, it should be replaced immediately, and construction is not allowed to avoid loss. What are the characteristics of
toilet lid damper? Let's take a brief look.
1. The speed, rotary damper and torque change with the speed. As the speed increases, the torque also increases. When the speed slows down, the torque also decreases. The starting torque is different from the standard torque.
2. Temperature characteristics, the torque of the rotary damper changes with the temperature of the working environment. When the ambient temperature increases, the torque decreases, and when the ambient temperature decreases, the torque increases. This is because the viscosity of the viscous oil in the damper changes when the ambient temperature changes. However, when the ambient temperature returns to normal temperature, the torque also returns to the original value. What is the principle of
toilet lid damper? Let's take a brief look.
toilet lid damper its structure is the use of hydraulic system principle and electromagnetic technology principle can make its operation, in order to make the damper has a good shockproof effect, under normal circumstances, the damper structure is the use of passive devices, and this damper, with electromagnetic bearings, making the damper structure more excellent, and at the same time has electromagnetic and shockproof performance.
Related News
Message
Professional service team answers
Contact Us
Contact: Miss Peng
Phone: +86 13537499713
Tel: +86 0769-87769161
Fax: +86 0769-87681161
Email: sales@longji-lf.com, zxm@longji-lf.com
Address: Room 201, Building 2,and Room 301, Building 4, No. 7 Jinming North Road, Xiegang Town, Dongguan City,
Scan consultation