How to repair the toilet lid damper
Release time:
2022-05-16 10:57
Source:
Basic principle of toilet lid damper: The internal force of the damper is small, that is, the torque generated is small. As the cover falls, the external gravity becomes larger and the internal force becomes larger and larger, while the space for the internal damping oil becomes smaller and smaller, and the reaction force becomes larger and larger, so as to achieve the buffering effect. Features of
toilet lid damper: easy installation, simple design, can be installed and designed according to customer requirements, resistance value is randomly distributed, and there is torque when the opening surface rotates 30 degrees. The toilet lid damper is two pins that connect the toilet lid and toilet. They are filled with viscous damping grease to cushion, seal and lubricate, toilet lid damper grease inside is disposable. Poor sealing will leak or volatilize, affecting the deceleration performance. This kind of grease is generally not good to add and can only be replaced. Its unique cushioning and shock absorption functions can improve the descending process of the toilet seat into a gentle mechanical movement process.
We use the toilet every day, but after a long time of use, various malfunctions will occur. At this time, the toilet lid damper needs to be repaired. Then how to repair the toilet lid damper?
How to repair the 1. toilet flap?
1. Check the toilet lid and put it down. If it can stop at any position, slowly and evenly drop, indicating that the toilet lid is normal. If it drops quickly, there is a problem with the toilet lid damper system.
2. Press the inside of the latch in the connection area between the toilet lid and the toilet outward, and then lift the toilet lid to remove the toilet lid. If you only look from the outside, you can't find a place to remove it.
3. Insert the short end of the wrench into one end of the pin from the outside, push it hard to let the pin come out, and then take out the pin at the other end.
4. These two pins are the toilet lid damping system, which is usually composed of inner and outer cylinders and viscous damping fluid sealed in the cylinder. Most of the problems are caused by the leakage of damping fluid with poor sealing, so it is more troublesome to repair, and it is generally replaced. After removal, it is necessary to measure the specifications of each part, and then select the same type of pin.
5. According to the above disassembly sequence, put the bolt back in reverse, and then press the two holes on the bolt under the toilet lid down on the two uprights on the toilet to install it.
6. After installation, check whether the cover and seat cushion can be parked anywhere. If so, the damping system has been repaired.
In addition, when cleaning the toilet, you can also follow the above disassembly method, which will make cleaning more convenient.
Summary: The above is the specific method of repairing the toilet lid damper. It can be seen from the above article that the corresponding steps must be strictly followed in actual operation to ensure that the toilet will not be harmed twice while returning to normal, and a lot of materials can be saved.
Related News
Message
Professional service team answers
Contact Us
Contact: Miss Peng
Phone: +86 13537499713
Tel: +86 0769-87769161
Fax: +86 0769-87681161
Email: sales@longji-lf.com, zxm@longji-lf.com
Address: Room 201, Building 2,and Room 301, Building 4, No. 7 Jinming North Road, Xiegang Town, Dongguan City,
Scan consultation