Do you know the adjustment method of toilet lid damper?
Release time:
2022-05-30 13:46
Source:
The toilet is a very common item in our daily life. When we use the toilet, sometimes the toilet lid will make a loud noise. The appearance of the toilet lid damper reduces this noise, thereby extending the life of the toilet lid and reducing noise. There are generally two types of toilet lid dampers.
One is that frictional resistance generates heat, which reduces the mechanical energy of the system and converts it into internal energy. Such a toilet seat damping buffer is called a friction type toilet seat damper.
The other is that the system causes the vibration of the surrounding particles, and gradually makes the system energy radiate to the outside world and convert it into wave energy. This type of toilet seat damper is called a radiant type toilet seat damper. So, what are the adjustment methods of the toilet seat shock absorber? How to remove the toilet lid damper?
Some toilet lids will slowly fall down when they are closed, instead of suddenly falling down and making a loud noise. This is because the toilet lid damper works, which can buffer the cover and let the toilet lid fall slowly, thereby extending the service life of the toilet lid. If the toilet lid is used more and more and the lid falls off faster and faster, it depends on whether the shock absorber of the toilet lid should be adjusted.
1. Adjustment method of toilet lid damper
Adjust the baffle of the toilet lid and tighten the two screws on the back of the toilet lid. There is a nylon pad inside the shock absorber. If the toilet lid is frequently switched on and off, this place will wear out, which will affect the shock absorption effect, so just tighten the screws on both sides. If it is useless to tighten it again, you can ask someone to replace it with a new one. The mounting hole on the toilet seat is equipped with a buffer oil core, and the toilet lid and the seat ring are connected by two connecting handles, one is a round hole for support, and the other is a flat hole for torque transmission.
2. how to remove the toilet lid damper?
first find two small holes inside the toilet lid, there is a nut below, and then loosen the nut to remove the toilet lid. In order to facilitate tightening the screws, it is recommended that you use a hexagonal wrench. The damper attaches to the toilet seat. There is no difference in toilet seat size. Only two bolts need to be adjusted during installation. If the toilet lid does not need to be replaced, tighten it with a wrench; if it needs to be replaced, the toilet lid and the rear pin should be replaced and installed together.
3. damping principle of toilet lid damper.
When the toilet falls, drive the shaft to rotate, and squeeze the damping oil from the big hole to the small hole through the screw. If the cover plate is heavier, there will be a certain amount of damping oil inside, and there is a spiral shaft in the middle, which can be discharged slowly from the small hole to realize the deceleration function of the toilet. Damping helps to reduce the resonance amplitude of the mechanical structure, thereby avoiding structural damage due to vibration stress reaching the limit. Damping helps the mechanical system to quickly return to a stable state after an instantaneous impact.
Related News
Message
Professional service team answers
Contact Us
Contact: Miss Peng
Phone: +86 13537499713
Tel: +86 0769-87769161
Fax: +86 0769-87681161
Email: sales@longji-lf.com, zxm@longji-lf.com
Address: Room 201, Building 2,and Room 301, Building 4, No. 7 Jinming North Road, Xiegang Town, Dongguan City,
Scan consultation