News

Home

Some knowledge of intelligent toilet lid damper

Release time:

2022-06-14 09:21

Source:

The oil core of the toilet lid damper is added: hinge damping grease, which is formed by adding damping grease between the shaft and the shaft sleeve. When the cover is opened, the shaft and the shaft sleeve are clamped together and rotate at the same time, and the damping grease does not work, so it is normally opened; when descending, the shaft and the shaft sleeve are not stuck together, while the sheath and the shaft sleeve base are stuck together in the opposite direction, The damping grease acts to form a slow descent. When the

toilet falls, the rotating shaft is driven to rotate, and the damping oil is squeezed from the direction of the large hole to the direction of the small hole through the screw. Generally, when the cover plate is relatively heavy, it will be filled with a certain amount of damping oil, and there is a rotating shaft in the middle. The rotating shaft is processed into a spiral shape and discharged from the small hole direction, which can only be discharged slowly to realize the slow descent function of the toilet.

toilet lid damper grease is a high-viscosity synthetic oil as the base oil, lithium soap as thickener, adding solid lubricants, anti-oxidation, anti-corrosion and other additives refined from high-performance white grease. Specially used for toilet lid hinges or toilet buffer hinges, as well as the lubrication of plastic gears and plastic / metal friction parts under high-speed working conditions. This high adhesion grease can overcome the centrifugal force at high speed, has excellent adhesion, small friction coefficient, can reduce noise for a long time at high speed, and has wear resistance.

In addition, this toilet lid damper grease has excellent high and low temperature performance and oil film lubrication ability, especially low volatility and diffusion. Excellent wear resistance, strong bearing capacity, good compatibility with most plastics and rubber; good water resistance, oxidation resistance, shear stability, and long service life.

The toilet lid damper helps to reduce the resonance amplitude of the mechanical structure, thereby avoiding structural damage caused by the vibration stress reaching the limit; damping helps the mechanical system to quickly return to a stable state after being subjected to instantaneous impact. Damping helps to reduce acoustic radiation caused by mechanical vibration and mechanical noise. The noise of many mechanical parts, such as the housing of transportation vehicles and saw blades, is mainly caused by vibration. Damping can effectively suppress resonance, thereby reducing noise.

in the actual vibration, because the friction always exists, the initial energy obtained by the vibration system in the vibration process due to the resistance of the system to do negative work, so that the energy of the system is continuously reduced, the intensity of the vibration is gradually weakened, the amplitude is smaller and smaller, so that the vibration gradually stopped. Because of this, the mechanical energy of the system is gradually reduced by friction and converted into internal energy, and the amplitude weakens the vibration with time.

In real life, the doors of rooms or bathrooms in many buildings are equipped with torsion springs that automatically close the door, and damping hinges are also installed accordingly, so that the damping of the door is close to the critical damping, so that people close the door or the door is blown by the wind. It will not make too much noise when moving.

Do you know the adjustment method of toilet lid damper?

Teach you how to repair toilet lid damper