News

Home

toilet lid damper need to pay attention to what matters?

Release time:

2022-08-03 10:12

Source:

In fact, the rotary damper is a small object that is essential to everyone's daily life. You can find it on some small machines at home, and sometimes you can even install it yourself. Then, what should be paid attention to for the toilet lid damper?

What should be paid attention to for the toilet lid damper?

马桶盖阻尼器

1. In order to ensure the reliability of the seal, the surface of the piston rod should not be damaged. It is forbidden to apply paint and chemicals on the piston rod. It is not allowed to install the damper in the required position before spraying or painting.

2, working environment temperature: minus 35-70. (Specially manufactured under 80)

3. Do not turn the piston rod of the shock absorber to the left. If you need to adjust the direction of the connector, you can only rotate it to the right.

4. When installing the connection point, it should be rotated flexibly and not stuck.

5, the size should be reasonable, the strength should be appropriate, the stroke size of the piston rod should have a margin of 8mm.

Toilet lid damper: What is the difference between sliding door buffer and damper?

1. Definition Difference: Damper is a kind of inside the guide rail, which provides the buffer effect of reducing noise by using buffer performance. Buffer refers to the actual role of the guide rail, usually refers to the guide rail with buffer effect.

2, use difference: dampers are generally connected to cabinets, furniture, briefcases, bathroom cabinets and other wood, steel drawers and other furniture drawers. Buffer slides are used to connect drawers.

3. Price difference: buffer price is low, accuracy is low, and friction coefficient is large. The damper structure is more complex, the price is relatively high, the friction coefficient is small, and the accuracy is high. What are the installation methods of

toilet cover damper?

1. Ensure that the guide rail surface and the inner surface of the damper are free of oil stains. The top surface of the guide rail and the top surface of the damper are respectively marked with the model number, factory number and arrow. The damper is inserted between the two guide rail sliders according to the corresponding number and arrow direction. Tighten the mounting screws of the shock absorber by hand, place the dial gauge on the two corners of the shock absorber side, and push the shock absorber sideways on the guide rail so that the pointer of the dial gauge points to "0". Push the other side of the damper to press it on the guide rail, read and record the figures of the two dial indicators, and calculate the average value of the measurement; adjust the damper to half; tighten the bolt with a torque wrench; remove the shock absorber The plug on the side, install the lubrication joint and start to supply oil.

2. Apply a layer of lubricating oil of the same grade as the centralized lubrication of the machine tool on the inner surface of the shock absorber; insert the shock absorber between the two sliders on the guide rail according to the factory number mark and arrow; connect the side of the damper Lubrication joint, connect the hydraulic pump, and then install the workbench on the slider, according to the corresponding torque requirements, use a torque wrench to tighten all the screws connecting the sliders. The screw connecting the damper only needs to be gently tightened by hand; use a hydraulic pump to supply oil to the shock absorber, and then push the workbench back and forth two or three times to supply oil to the shock absorber. Repeat two or three times. After that, use a torque wrench to tighten the bolts connecting the vibration damper as required.

toilet lid damper maintenance methods?

What should we pay attention to when installing one-way dampers? How to clean it?