Industry dynamics

Some basic common sense of the damper

06

2021-05

When the aircraft climbs to high altitude, due to the reduction of air density (changes in aerodynamic characteristics), the damping of the aircraft will be reduced, causing the aircraft to easily oscillate. Consider a situation in which oscillations occur due to very little damping of the aircraft's pitch. In order to suppress the oscillation, the pilot needs to push the lever when the aircraft is looking up to prevent the aircraft from looking up, and pull the lever when the aircraft is looking down to prevent the aircraft from looking down. It is very difficult for pilots to complete the task and stabilize the aircraft at the same time. In order to improve this situation and reduce the workload of the pilot, a device was invented to replace the pilot to complete this complex operation, that is, the damper. Above just to pitch

Damping buffer: The influence of the structural composition of the damper on the impact damping performance

20

2021-05

The effect of damper structure on the performance of impact dampers with particle damping agent is studied. By changing the diameter of the impactor and the type of granular material, the damper is placed on the cantilever beam, and various composition combinations are obtained by experimental methods. The response of the damper under certain conditions. The results show that in the shock absorber equipped with particle damping agent, when the particle material is replaced, the average amplitude reduction rate is 72.7-75.4, which is higher than 62.7 without particles. When the impactor diameter is changed, the average amplitude reduction rate is 72.1~75.9, which is 33.3 than the average value when there are only particles in the damper

The working principle of the rotary damper

19

2021-07

Many of our products use rotary dampers in our lives and work. Many companies will install this device when the mechanical equipment is in motion, so that the product can obtain a smooth mechanical movement and improve the quality and life of the product. Rotary dampers are suitable for various mechanical devices that require buffering, and are widely used in game consoles, Blu-ray players, notebook computer opening and closing, smart toilet covers, etc.

Characteristics and working principle of rotary damper

03

2021-08

Rotary dampers are common in our life and work. It is suitable for various devices that need to buffer mechanical movement to reduce the friction between equipment and extend the service life of the product. The rotary damper enables the product to obtain smooth mechanical movement, thereby improving the quality and service life of the product. There are one-way buffering and two-way buffering. It is used for computer optical drive, CD player entering and leaving warehouse, opening and closing of notebook computer, seat adjustment, mobile phone flip cover, cassette tape, etc.

toilet lid damper: what is the damper?

18

2021-08

The toilet lid damper is a device that provides movement resistance and consumes movement energy. Using damping to absorb energy and reduce impact is not a new technology. Since the 1970 s, people have gradually transferred these technologies to structural projects such as buildings, bridges and railways, and their development has been very rapid. Especially in the hydraulic viscous damper, which has a history of more than 50 years, before it was accepted by the American structural engineering community, especially during the long earthquake process, a lot of experiments, rigorous review and repeated demonstration tests have been carried out.

Some knowledge points of damping wheel

03

2021-09

What should be paid attention to when using the damping wheel? Gear transmission is one of the most commonly used forms in machinery. Nowadays, the gear system is developing in the direction of high speed, heavy load, light weight, high density and automation. In gear transmission, the problem of noise caused by vibration is becoming more and more prominent, and the control of axial vibration of gear transmission is the key to reduce noise. Therefore, according to this situation, a damping material is added to the gear, or a damping wheel is made of the damping material.
< 1...678...17 > Go to page