LF-11C small damper

Classification:

Smart Home Damper

On-board interior damper

360 ° Rotary Damper

two-way rotary damper

Message

sales@longji-lf.com

Product Description

The small damper is suitable for various small and medium-sized boxes, flip covers, telescopic, and sliding products. It is currently widely used in high-end DVD flip cover products, providing shock resistance and slowing down the door opening and closing speed, making it smooth and effective in reducing noise generated during product use. The damper can enhance the overall quality of the product and extend its service life.

Product specifications:

Model	Torque	Damping rotation direction
LF-11C-30G	30±10gf.cm	360° rotation (bi-directional)
LF-11C-40G	40±10gf.cm	360° rotation (bi-directional)
LF-11C-50G	50±10gf.cm	360° rotation (bi-directional)
LF-11C-60G	60±10gf.cm	360° rotation (bi-directional)
LF-11C-70G	70±10gf.cm	360° rotation (bi-directional)
LF-11C-80G	80±10gf.cm	360° rotation (bi-directional)

Note: 1) The marked torque is tested under conditions of temperature at 23℃ and humidity at 80%, with a motor speed of the test stand at 36 revolutions per minute; the data is measured after the damper rotates for five circles.
2) Torque customization can be provided by changing the viscosity of the damper grease.
3) The maximum operating temperature range of the damper: -40℃ to +90℃.
4) This series of dampers can provide gear customization.

Damper appearance size diagram:

Damper gear parameters

Module	Number of teeth	(Pitch) Circle Diameter	(Pressure Angle)
.6	.11	.6.6	(20°)

阻尼器产品材质

Shell/Top Cover	Axis	Gear	Seal Ring	Damping Oil
PC	Stainless Steel/POM	POM	Silicone	Silicone Oil

Damper characteristics

A. Temperature characteristics:
The torque generated by the damper will change under the influence of environmental temperature. This is because changes in temperature will affect the viscosity of damping oil; torque output decreases with increasing temperature and increases with decreasing temperature. When the temperature returns to normal, torque also returns to its original value.

B. Speed characteristics:
The torque of the damper will also change when using different rotational speeds. Generally, as rotational speed increases, torque also increases; as rotational speed decreases, torque decreases as well. Additionally, starting torque differs from standard torque.

Specific usage methods for gear dampers

A. Gear and rack fit (linear motion of workpiece)

B. Gear and gear fit (rotational motion of workpiece with angle limitation)

C. Gear and gear fit (no angle limitation)

D. Workpiece directly connected to damper rotating shaft

Key words:

Damper

LF-38A high resistance bidirectional plastic rotary gear damper

LF-11 Micro Damping Wheel